PROLiNK Hurricane 9200/S, User Manual

Page: 46 / 205

Hurricane 9200/S ADSL Ethernet Router User’s Guide
46
' " , 8
To reboot the device, display the Commit & Reboot page, select the
appropriate reboot mode from the drop-down menu, and then click
.
You can select from the following reboot options:
Option Description
Reboot
Reboots using the settings currently in memory,
including any changes you made and committed
during the current session.
Reboot from Default
Configuration
Reboots the device to default settings provided by
your ISP or the manufacturer. Choosing this
option erases any custom settings.
Reboot from Backup
Configuration
Reboots the device using the settings that were in
effect prior to the most recently committed
settings.
Reboot from Last
Configuration
Same as Reboot.
Reboot from Clean
Configuration
Reboots the device with no configuration. This
option will disable access to the Configuration
Manager, as no LAN interface will be defined. This
option is intended only for technicians who have a
serial port connection to the device and
knowledge of its command line interface.
Reboot from
Minimum
Configuration
Reboots the device with only these settings:
o
An Ethernet interface is configured with IP
address 192.168.1.1 (mask 255.255.255.0).
o
The user login is set to the following:
User Name: admin
Password: password
Rebooting may take 20-30 seconds. If your browser appears to be
waiting to reconnect, press <F5> on your keyboard to refresh the
connection. Or, retype the URL (192.168.1.1 by default) in your
browser’s address box and press <Enter>. The page should
redisplay.
If you have difficulty in reconnecting to Configuration Manager after
rebooting, or if the device is not providing Internet connectivity as
before, reboot using the Reboot from Backup Configuration setting
to return to the previous settings.
WARNING
The Hurricane 9200/S provides a Reset button on the back panel
(in addition to the power on/off button); do not use it to activate
new changes. This button resets the device settings to the
manufacturer’s default values. Any custom settings will be lost.