PROLiNK Hurricane 9200/S, User Manual

Page: 58 / 205

Hurricane 9200/S ADSL Ethernet Router User’s Guide
58
%"" % 8 <
You can create an ATM VC interface if none has been predefined
on your system or if you use multiple services with your ISP. Each
service may require its own VC. Follow these instructions to add a
VC:
1. From the ATM VC Configuration page, click .
The ATM VC – Add page displays:
Figure 16. ATM VC – Add Page
2. Select an interface name from the VC Interface drop-down
list.
The list begins with the next available ATM VC interface name,
in sequential order.
3. Enter the VPI and VCI values assigned by your ISP, and
select the mux type from the drop-down list.
4. In the Max Proto per AAL5 text box, enter the number of
higher-level protocols (PPP, EoA, and IPoA) that the ISP
indicated that you will need to configure to operate over this
VC.
For many users, only one is required.
5. Click .
6. When the confirmation page displays, click to
return to the ATM VC Configuration page.
The new interface should now display in the ATM VC
Configuration table.
7. If you want the changes to be permanent, follow the
instructions on page 45 to commit them.
You may need to create a new WAN interface, or modify an existing
interface, so that it uses the new VC. See the instructions for
configuring a PPP (page 59), EoA (page 65), or IPoA (page 69)
interface, depending on the type you use to communicate with your
ISP.