BIW1A
series
~53~
To install a Supervisor or User Password, follow these steps:
1.
Highlight the item Supervisor/User password on the main menu and press
Enter.
2.
The password dialog box will appear.
3.
If you are installing a new password, carefully 4W in the password. You
cannot use more than 8 characters or numbers. The password will
differentiate between upper case and lower characters. Press
Enter
after
you have typed in the password. If you are deleting a password that is
already installed just press
Enter
when the password dialog box appears.
4.
The system will ask you to confirm the new password by asking you to
type it in a second time, Carefully type the password again and press
Enter
,
or just press
Enter
if you are deleting a password that is already installed.
5.
If you type the password correctly, the password will be installed.
3.13 Save and Exit Setup Option
This allows you to save the new setting values in the CMOS memory
and continue with the booting process. Select what you want to do, press
<Enter>.
3.14 Exit Without Saving Option
This allows you to exit the BIOS setup utility without recording any new
values or changing old ones.
Highlight this item and press
Enter
to save the change that you have made in
the setup utility and exit the setup program. When the
Save and Exit
dialog
box appears, press
Y
to discard changes and exit, or press
N
to return to the
setup main menu.
