BIW1A
series
~48~
off. If the value is set to Delay 4 Sec. the power button must be held down for
a full four seconds to cause a software power off.
PowerOn by Ring
Default: Disabled
Enabled: when system in suspend mode, it can be wake up by modem.
Disabled: it cannot be wake up by modem.
Wake Up On LAN
Default: Enabled
Enabled: If you have installed LDCM administrator software, and any client
side is powered off, you can wake up by LAN through the LDCM
mechanism.
Resume by Alarm
Default: Disabled
When Enabled, two additional lines will be added to the screen Date (of
Month) Alarm; Time (hh:mm:ss) Alarm to let user set the desired date and
time. After power off, the system will automatic power on at the specified
date and time.
Reload Global Timer Events
When enabled, an event occurring on each device listed below restarts the
global time for Standby mode.
IRQ [3 -7, 9-15], NM;
Primary IDE 0;
Primary IDE 1;
Secondary IDEO;
Secondary IDEL;
FDD,COM,LPT Port
PCI PIRQ[A-D]#
