BIW1A
series
~50~
requires a special IRQ and DMA, you can modify the list of assignments.
Change the values of the IRQ and DMA that are required to Legacy ISA.
IRQ 3/4/5/7/9/10/11/12/14/15
DMA 0/1/3/5/6/7 (BIW1A-I Only)
This item allows you to determine the IRQ/DMA assigned to the ISA bus and
is not available to any PCI slot. Choices are Legacy ISA and PCI/ISA PnP.
Assign IRQ For VGA
D
efault: Enabled
To assign a IRQ to VGA card if you enable this item.
Assign IRQ For USB
D
efault: Enabled
To assign a IRQ to USB Ports if you enable this item.
3.8 PC Health Status
This option displays a list of PC health status which are detected by on board
sensor chips.
CMOS Setup Utility – Copyright © 1984-1998 Award Software
Frequency/Voltage Control
CPU Warning Temperature
Disabled
Current System Temp.
40
0
C/104
0
F
Current CPU1 Temperature
40
0
C/104
0
F
Current CPUFAN1 Speed 5037 RPM
Current CPUFAN2 Speed 0 RPM
Current CPUFAN3 Speed 0 RPM
IN0(V) 2.01 V
IN2(V) 2.48 V
IN2(V) 3.42 V
+ 5 V 4.99 V
+12 V 11.97 V
-12 V -11.86 V
- 5 V - 5.09 V
VBAT(V) 3.22 V
5VSB(V) 5.45 V
Shutdown Temperature 60
0
C/140
0
F
Item Help
Menu Level
!
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-safe defaults F7:Optimized Defaults
