BIW1A
series
~38~
Enabled : Activates automatically when the system boots up, if anything
attempts to access the boot sector or hard disk partition table will
cause a warning message to
appear
.
Disabled : No warning message will appear when anything attempts to access
the boot
sector or hard disk partition table
.
Many disk diagnostic programs which attempt to access the boot sector table
can cause the above warning message.
CPU Internal Cache
D
efault: Enabled
All the processors that can be installed in this motherboard use internal (level
1) cache memory to improve performance. Leave this item at the default
value Enabled for better performance.
External Cache
D
efault: Enabled
Most of the processor cartridges that can be installed in this
motherboard have (level 2) external cache memory (the Celeron-
266MHz is an exception). Only enable this item if your processor
cartridge has external cache memory.
CPU L2 Cache ECC Checking
D
efault: Enabled
This item can be used to enable ECC (Error Checking Code) for the level-2
cache memory. We recommend that you leave this item at the default value
Enabled.
Quick Power On Self Test
D
efault: Enabled
You can enable this item to shorten the power on testing and have your
system start up a little faster.
First/Second/Third Boot Device
D
efault: Floppy,HDD-0,LS/ZIP
The BIOS attempts to load the operating system from the devices in the
sequence selected in these items.
Swap Floppy Drive
D
efault: Disabled
If you have two floppy diskette drives in your system, this item allows
you to swap around the assigned drive letters so that drive A becomes
drive B, and drive B becomes drive A.
