Digital Input 5
Polarity
The polarity of digital input can be
changed either normally open or
normally close.
Normally
Open
Normally Open
Normally Close
Digital Input 6
Polarity
The polarity of digital input can be
changed either normally open or
normally close.
Normally
Open
Normally Open
Normally Close
MPU/Chg Alt Used to enable or disable MPU.
Disabled Disabled*
Enabled
Pulses in a RevNo. of pulses, from magnetic pickup or
W-Point of charging alternator, in one
revolution of the engine. This shall be
used to calculate the RPM.
120.0
1.0-300.0
RPM Source Take RPM from generator or MPU/W-
Point.
Gen Vol
MPU
Gen Vol
CAN Bus
(If Can enabled)
Test Mode Test mode from the front Keys can only
be selected if this setting is enabled.
Disabled Disabled*
Enabled
MCB Polarity This parameter define the polarity of
MCB operation.
When normally close polarity is selected,
contactor will connect with normally
close point of the relay. When normally
open polarity is selected, contactor will
connect with normally open point of the
relay.
Normally
Close
Normally Open
Normally Close
Fan High
Current
Maximum permissible limit for fan
current.
Disabled 0.0-3.5
Disabled*
Fan Low
Current
Minimum limit for fan current.
Disabled 0.0-3.5
Fan Current
Delay
This is the timer for fan current trip.
Disabled 1-100
6
5
>
>
