Processor Technology Sol-PC, Manual

Page: 61 / 284

PROCESSOR TECHNOLOGY CORPORATION
SINGLE BOARD TERMINAL COMPUTER
TM
SECTION III
Sol-PC
( ) Step 45.
Using four 4-40 x 1/4 binder head screws, lockwashers
--
and hex nuts,
install two brackets (Sol-1040) for personality
module in area to right of J5.
Position brackets over the
mounting holes as shown in Figure 3-11.
Insert screws from
front (component) side of board,
place lockwasher on each
screw on back (solder) side of board, start nuts and tighten.
Figure 3-10.
CPU Functional Test No. 2 display,
6575 character generator (U25).
6574 displays: 9
, Bracket (Sol-1040) ,
Screw
Guide
-40 x
Sol-P
Side
of Board
Figure 3-11.
Personality module bracket/guide
installation (Viewed from right
end of Sol-PCB).
III-31