7
64
63
59
65
3
4
71
41
42
43
44
45
79
3. Orient the Front Stabilizer (63) as indicated by
the sticker.
Attach the Front Stabilizer (63) to the front of the
Frame (59) with two M8 x 60mm Carriage Bolts
(64) and two M8 Acorn Nuts (65) (only one is
shown).
4. Remove the Right Pedal Locknut (51) from the
shaft of the Right Pedal (71).
Make sure that a Pedal Spring (41), a Pedal
Washer (42), a Pedal Sleeve (43), a Crank Arm
Washer (44), and a Crank Arm Spacer (45) are
on the shaft of the Right Pedal (71).
Firmly tighten the shaft of the Right Pedal (71)
clockwise into the Right Crank Arm (79). Then,
tighten the Right Pedal Locknut (51) onto the
shaft.
Attach the Left Pedal (not shown) in the same
way. Firmly tighten the Left Pedal counterclock-
wise into the Left Crank Arm (not shown).
51
