9
7
11
12
13
14
36
11
10
18
17
19
54
59
Adjustment
Holes
19
17
7. Tighten an M8 x 20mm Screw (11) with an M10
Black Washer (12), a Handlebar Cover (13), and
an M8 Large Washer (14) into each end of the
Handlebar Axle (36) at the same time.
8. Attach the Seat (10) to the Seat Post (18) with
three M8 Locknuts (19) and three M8 Washers
(17). Note: The Locknuts and Washers may
be preattached to the underside of the Seat.
Next, loosen the Knob (54) a few turns, pull the
Knob outward, insert the Seat Post (18) into the
Frame (59), and then release the Knob. Move
the Seat Post upward and downward slightly
to make sure that the pin on the Knob is
engaged in one of the adjustment holes in
the Seat Post. Then, tighten the Knob.
8
