10
4
11
11
5
6
59
9
9. While a second person holds the Upright (4)
near the Frame (59), connect the Reed Switch
Wire (6) to the Console Wire (5).
Insert the excess wire into the Frame (59).
Tip: Avoid pinching the wires. Insert the
Upright (4) into the Frame (59). Attach the
Upright with three M8 x 20mm Screws (11).
Avoid pinching
the wires
10
10. The Console (1) can use four D batteries (not
included); alkaline batteries are recommended.
Do not use old and new batteries together or
alkaline, standard, and rechargeable batter-
ies together. IMPORTANT: If the Console has
been exposed to cold temperatures, allow it
to warm to room temperature before insert-
ing batteries. Otherwise, you may damage
the console displays or other electronic
components.
Remove the battery covers from the back of the
Console (1), and insert batteries into the battery
compartments. Make sure to orient the bat-
teries as shown by the diagrams inside the
battery compartments. Then, reattach the bat-
tery covers.
To purchase an optional power adapter, call
the telephone number on the cover of this
manual. To avoid damaging the console,
use only a manufacturer-supplied regulated
power adapter. Plug one end of the power
adapter into the receptacle on the console; plug
the other end into an outlet installed in accor-
dance with all local codes and ordinances.
1
Battery
Cover
Battery
Cover
11
