18
Inspect and tighten all parts of the exercise bike
regularly. To clean the exercise bike, use a damp
cloth and a small amount of mild detergent; never use
abrasives or solvents to clean the exercise bike. To
avoid damaging the console, keep liquid away from
the console.
CONSOLE TROUBLESHOOTING
Most console problems are the result of low batteries.
See assembly step 10 on page 10 for battery instal-
lation instructions.
ADJUSTING THE DRIVE BELT
If the drive belt causes excessive noise or slips as you
pedal, the drive belt may need to be adjusted.
See the EXPLODED DRAWING on page 23.
Remove the six M4 x 15mm Tek Screws (22) from the
Left and Right Shields (46, 70). Then, gently pull the
Left Shield away from the Right Shield.
Note: For clarity, the Left Shield (46) is not shown
in the drawing.
Tighten the M8 Flange Nut (55) until the Drive Belt (48)
is tight.
When the drive belt is correctly adjusted, reattach the
left shield.
MAINTENANCE AND TROUBLESHOOTING
48
55
