16
.
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
• Be sure to perform the auto gain control when the screen
has both 100% black and 100% white areas displayed.
Saves the setting and quits the OSD.
End of OSD
Saves all the adjusted settings in the EEPROM.
Auto Gain (Analog RGB only)
Icon selection
Icon decision
• Be sure to perform the auto adjust while things except
that black are shown on sides of the display.
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Input Source
Auto Adjust (Analog RGB only)
Applies the setting and then returns to the top menu.
Cancels the setting and then returns to the top menu.
Resets all the settings and then returns to the top menu.
Cancels the setting and then returns to the top menu.
All Reset
Note
Regardless of the above clause, Digital
Electronics Corporation shall not be held
responsible for any damages or third-party
claims for damages or losses resulting
from the use of this product.
071257D .FP3650-MT01E-BTH 2006.8 JM/A ©2006 Digital Electronics Corp.
Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku,
Osaka 559-0031, Japan
URL:http://www.pro-face.com/
