9
(1) According to the Panel Cut size, make instllation holes on the panel.
(2) Check that FP has instllation fastners. Insert the FP from the front.
(3) The following figures show the eight(4) fastener insertion slot locations. Insert each
fastener’s hook into the slot. Tighten the screws in a diagonal pattern, and slowly
increase the torque.
• To avoid an electric shock, when connecting the FP’s power cord terminals to the
power terminal block, confirm that the FP’s power supply is completely turned OFF,
via a breaker, or similar unit.
5
Instllation
• Installation gasket must be used even though it is not necessary for
its environment. For installation, refer to the FP-3500T/3600T/
3650T series User Manual.
• Tightening the screws with too much force can damage the FP unit’s
case.
• The necessary torque is 0.5N
•
m.
6
Wiring
22
7.
5
+1
0
FP
Unit: mm [in]
301.5 [11.87 ]
+1
0
+0.04
0
[8
.96
]
+0
.0
4
0
under 4-R3
FP
Panel
Panel thickness
1.6[0.06] to 10[0.39]
Bottom
Insertion
Slots
Panel
Installation
fastener
Top
FP
Hook
