Operating instructions wheel-e
43
Subsequent inspection:
After another 1,000 km or 1 year after the last inspection or after
heavy use
Kilometre reading:___________________
OK /
carried out
not OK
resolved
Check that all screws/fastening elements are firmly seated
Clean and oil/grease all pivot points and bearings
Visual inspection of the frame and attachments for crack
formation, deformation, etc.
Functional and safety check of the brakes and, where
necessary, replacement of the brake fluid, brake pads,
brake cables
Check the capacity of the rechargeable battery
Check the electrical connections and the driving signal
transmitter
Check of the control parameters and functionality of the
drive system, software update if necessary
Check the spoke tension of the drive wheel and, if required,
correction of the tension/recentering as well as check of the
axle nuts of the drive wheel for firm seating (tightening
torque 40 Nm)
Functional and safety check of the drive wheel and, if
required, replacement of the tyre on the product
Functional and safety check of all lights (if fitted), steering
and adaptation on the product and the adapted
wheelchair/wheelchairs
Test drive/functional test
resolved = the fault was corrected
Comments:
Stamp:
Date / Signature
