Operating instructions
wheel-e
26
Figure 41: Actuation button for the rear lights
When the product is equipped with an
LED
light set
, the front lights are supplied by the
rechargeable battery/rechargeable batteries of
the drive system and are also switched on and
off using the display of the drive system. To
switch on the front lights, press and hold
for
four seconds. The
display lights
will are then
also activated. To switch the lights off, press
and hold
again for four seconds. In doing
so, please note that the maximum range of the
product is reduced when the lights are
switched on. The front lights are installed on
the front of the product and the rear lights are
generally installed on the crossbar on the back
of the coupled wheelchair. The rear lights have
their own battery supply and the lights are
switched on and off using the actuation button
on the lights.
Figure 42: LED front lights
Figure 43: Switching the LED front lights on and off;
display lights are activated
Figure 44: Actuation button for the rear lights
21.7 Bell
The bell can be actuated with the thumb or
index finger without letting go of the handlebar.
Figure 45: Bell
21.8 Components and manufacturer
instructions
You will be instructed about the functions and
operation of the drive system, brakes and other
brand components during the hand-
over/training. You can also get information
later from the component manufacturers'
Press
Actuation button
for the rear lights
Actuation button
for the rear lights
Press and hold for 4 sec.
