Operating instructions
wheel-e
16
Figure 10: Valve adapter and clamp lever of the
compressor
Instructions for inserting a new hose:
Before inserting a new hose, the rim and
the inner tyre side wall must be checked
for foreign objects and cleaned if
necessary.
The condition of the rim tape must be
checked, especially at the valve hole. The
rim tape must fit well and firmly to provide
long-lasting protection against damage by
the burs and pointed spoke heads.
Before inflating, the entire tyre should be
checked on both sides, to ensure that the
hose is not pinched between the tyre bead
and the rim.
Carefully pull out the valve such that the
hose fits into the optimal position around
the valve.
21 Functional elements
21.1 Parking stand
21.1.1 Active and passive positions
By pressing down and turning the operating
lever, the parking stand positions can be
changed from the active to the passive
position, or vice versa. The passive position
can also be called the driving position. The
parking stand is then folded down to save
space.
Figure 11: Press down and turn the operating lever
Figure 12: Parking stand in the active position
Figure 13: Parking stand in the passive position
Valve adapter
Clamp lever
Operating
lever
