PRIXTON Kitchen Gourmet KG200, Operation Instruction Manual

Page: 32 / 120

11. Malfunctions, causes and solutions
11.1 Malfunctions during operation
Malfunction Cause Solution
Appliance fails
to start
Blender jug is not
correctly positioned
Position the blender jug 6 correctly
(see “7.3 Positioning the blender jug”)
Lid of the blender
jug is not correctly
positioned
Position the lid correctly (see “7.5
Positioning the lid of the blender jug”)
No power supply Check the plug and if necessary also the
fuse
Incorrect power
supply
Make sure to use the correct power
supply (see “6.1 Connecting the power
supply”)
There is liquid
underneath the
appliance
Blade assembly is
not correctly seated
and is leaking
Position the blade assembly correctly (see
“7.2 Inserting and removing the blade
assembly” )
The seal of the blade
assembly is
defective
Install a new seal
Liquid has escaped
from the blender
jug and has drained
through the base
unit’s overflow hole
onto the underlay
(see “6.8 Overflow”)
When blending liquids on level 9 or using
the pulse button, do not exceed a quantity
of 1 litre in the blender jug, otherwise liquid
may spray out. At speeds lower than 9, the
blender jug may contain up to 2 litre.
Liquid is leaking
from the
lid of the
blender jug
Seal is not correctly
positioned
Position the seal correctly (see “10.3
Cleaning the accessories” )
Seal is defective Install a new seal
Unable to select
a temperature
You have selected a
speed in the range 4
– 9
Select a speed in the range 0 – 3 (see “6.6
Setting the speed”)
It is not possible
to select a
speed higher
than 3.
the blender jug
temperature
exceeds 60°C,
Set the temperature to 0
32