background image

 

Page:

  

2

 

 

 

 

 

                                                                     

Rev:

 

04.2014

 

 

 

 

 

 

   

A

205

 

‐ 

Owner’s

 

Manual

 

 

CAUTION:  DO NOT ATTEMPT TO USE THIS EQUIPMENT 
WITHOUT FIRST UNDERSTANDING THE CONTENTS  OF 
THIS MANUAL. 

 

Introduction  

Overview of Prism A-205 Aluminium Mobile Hoist 

Before using this equipment, and to ensure the safe operation of your 

Prism A-205 Aluminium Mobile 

Hoist

, carefully read this entire manual, especially the section on “

Cautions

”. The 

A-205 

is designed to be 

used in conjunction with Prism Medical UK accessories  and slings. Please refer to any user guides supplied 
with these components and refer to them while reviewing this manual. 

 

Should any questions arise from reviewing this manual contact your local authorised Prism Medical UK    
Representative. Failure to comply with warnings in this manual may result in injury to either the operator, or 
the individual being lifted/transferred. Damage to the mobile hoist and/or related components may also occur. 
Be sure that the contents of this manual are completely understood prior to using this mobile hoist. 

 

Store this manual with the documents included with the mobile hoist and sling (s). Contents of this manual are 
subject to change without prior written notice.  

   

The 

Prism A-205 Aluminium Mobile Hoist

 

is a lifting aid used by health care professionals  to  transfer     

clients.  The mobile hoist makes it possible to move mobility impaired individuals with minimal strain or risk 
to the caregiver, while providing complete safety, dignity and comfort for the client.  

 

The 

Prism A-205 Aluminium Mobile Hoist

 is one of two components that make up this technology.  The 

other component, the sling, is a specially designed fabric accessory that attaches to the mobile hoist by means 
of a carry bar and straps, and holds an individual while the hoist, or transfer takes place. The sling is generally 
supplied with the mobile hoist at the initial time of purchase. Please refer to any user guides supplied with the 
sling and reference them while reviewing this manual.  

 

The 

 

Prism A-205 Aluminium Mobile Hoist 

has the ability to hoist an individual up from one location such 

as bed, then move the individual to another location and finally lower the individual into a chair or bath. The 
functions of lifting up or down, or opening and closing the legs on the hoist, are accomplished by pressing      
buttons on the hand control. The hand control is attached to the mobile hoist. Due to the design of the mobile 
hoist system, it takes very little effort to press a button to perform the desired motion.  

 

Please familiarise yourself with the components of the

 

Prism A-205 Aluminium Mobile Hoist

 by referring to 

the diagram on the next page. 
 
Following models are available for 

Prism A-205 Aluminium Mobile Hoist. 

 

  

 

Models Table for 

Prism A-205 Aluminium Mobile Hoist

 

Product Code  Product Description 

A-205 

A-205 - Aluminum mobile hoist 205 Kg 

Summary of Contents for A-205

































Reviews: