A
‐
205
‐
Owner’s
Manual
Rev:
04.2014
Page:
9
Assembly Instructions:
6. Remove the screws from the mounting position of push handle on mast assembly. Insert the screws
through the push handle bracket, and mount on the Mast assembly as shown in Figure 6, and 7.
Attaching QRS Locking Carry Bar to Hoist:
7. To attach QRS locking carry bar to the hoist, tilt the carry bar to almost 90°, and push the latch to the
swivel mount holder bolt as shown in Figure 8, and 9. Make sure that swivel mount of carry bar is perfectly
sat onto the swivel mount holder bolt as shown in Figure 10.
Figure 7
Figure 6
Figure 8
Figure 10
Figure 9
