Page:
8
Rev:
04.2014
A
‐
205
‐
Owner’s
Manual
Assembly Instructions:
4. The lifting height can be set at three different levels as shown in Figure 3. In most cases, lifting height at
middle hole is recommended. For extra lifting height, the lower most setting (lower hole on the mast) is
recommended. For lower lifting height, the upper most setting (upper hole on the mast) is recommended.
The distance between two holes is 2 inch / 50mm.
5. Using locking handles, secure the mast in the desired position on the base as shown in Figure 4.
Tighten the mast locking knob as shown in Figure 5. Adjust the position of the locking handles pointing in
downward direction towards the base of hoist (or ground) as shown in Figure 5.
For lower lifting height,
upper hole on the mast is recommended.
Lifting height at middle hole on mast is
recommended in most cases.
For extra lifting height,
lower hole on the mast is recommended.
Figure 3
Figure 5
Figure 4
Mast
Locking
Knob
Locking
Handles
