5–56
Replacement Procedures
Installation (continued)
11. Install the platen pulley so that it is aligned with the platen open motor
pulley (page 4–8).
12. Install, but do not adjust, the platen open belt (page 5–6).
13. Install the paper ironer bracket (2):
a.
With the flat piece of the bracket facing the front of the printer,
place the two hooks of the upper piece over the platen shafts.
The left hook goes between the left platen adjustment bracket
and the platen. The right hook goes between the two washers to
the left of the right platen adjustment bracket.
b. Install and torque three screws (1) to 20
±
2 inch–pounds.
14. Install the paper ironer (page 5–44).
15. Install the shuttle frame assembly (page 5–72).
16. Adjust the platen gap (page 4–14).
17. Adjust the platen open belt (page 4–4).
18. Return the printer to normal operation (page 5–86).
Summary of Contents for P4280
