Princeton Truck Mounted Forklift, Operator'S Manual

Page: 103 / 194

A5. MOUNTING PROCEDURES
95
Dismounting Procedure
– Smooth Ride
(continued)
12. Climb aboard the forklift using the 3-point contact method.
13. Fasten the seatbelt.
14. Start the engine.
15. Extend the mast slowly forward to move the forklift backward out of the
mounting kit.
16. Raise the forks to lower the forklift to the ground.
17. Tilt the mast forward until the wheel touches the ground.
18. Raise the mast slightly to pressurize the mast lift cylinder and to clear the
fork brace.
19. Ensure the rear wheel is pointing straight ahead.
20. Back up slowly until the forks are fully clear of the front and rear guides.
21. Lower the forks as low as possible, keep the mast extended fully and
drive off, looking in the direction of travel.