35,0(6
Cube L1
43
Revision 03 EN - 03/2021
14.6.2 Display of the measurements stored in the Cube L1
1. Press the
Load measurements
button
•
The last 30 measured values
stored in the device are read out
of the memory of the Cube L1.
2. Switch to the
Projects
tab.
In the project tree the read out
measured values are displayed.
3. Click on the
Power Measure-
ment
selection in the drop-down
list below the Toolbench.
The tools
Graph
,
Results Table
and
Measurement Value Dis-
play
are displayed.
4. Open the desired tool and drag
and drop the measured values
from the project tree into the
opened tool.
