35,0(6
Cube L1
16
Revision 03 EN - 03/2021
8.3
Align the device
The device must be aligned to the laser beam. The laser beam must hit the inlet aper-
ture in the middle. Please mind and adhere to the specifications and limit values given in
chapter 19, „Technical data“, on page 52
.
The device is positioned above the focus (see Fig. 8.1 on page 16). Make sure that
the laser beam is convergent and the maximum permissible power density at beam
entrance is not exceeded. The focal position of the laser beam must be located on the
lower edge of the device.
To align the device under the laser, a alignment tool is included (see chapter 8.3.1 on
page 17).
Presentation with perpen-
dicular beam incidence
Presentation with max. angle
of incidence of 5 °
5°
Cube L1
Focusing
plane
Laser beam
max. 7 mm
max. 7 mm
Fig. 8.1: Alignment to the laser beam
