manualshive.com logo in svg

Primes Cube L1, Original Instructions Manual

Share
Download
Primes Cube L1 Original Instructions Manual Download Page 11

35,0(6

Cube L1

11

Revision 03 EN - 03/2021

Further symbols that are not safety-related:

Here you can find useful information and helpful hints.

With the CE marking the manufacturer guarantees that his product is in confor-
mity with the EC guidelines.

Call for observing (visual feedback from the device or the software).

X 

Call for action

3 

About this operating manual

This documentation describes the installation and operation of the Cube L1 and per-
forming measurements with the Cube L1, the Cube App or the optional LaserDiagnos-
ticsSoftware LDS.

With the Cube App for mobile devices with Android™ you can operate and evaluate the 
device via a smartphone/tablet. The Cube App is available for free in Google Play-Store/
Apps.

For measurement operation with a PC, the LaserDiagnosticsSoftware LDS (option) 
must be installed on the PC. For a detailed description of the software installation, file 
management and evaluation of the measured data, please refer to the separate operat-
ing manual LaserDiagnosticsSoftware LDS.

4 

Conditions at the installation site

• 

The device must not be operated in a condensing atmosphere.

• 

The ambient air must be free of organic gases.

• 

Protect the device from splashes of water and dust.

• 

Operate the device in closed rooms only.

In industrial environments erroneous measurements may be triggered by strong elec-
tromagnetic fields. In this case we recommend EMC compliant shielding of the safety 
interlock cable.

Summary of Contents for Cube L1

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands