manualshive.com logo in svg

Primes Cube L1, Original Instructions Manual, Page: 21 / 56

Share
Download
Primes Cube L1 Original Instructions Manual Download Page 21

35,0(6

Cube L1

21

Revision 03 EN - 03/2021

Please observe the information on minimum and maximum energy input per measure-
ment according to chapter 12.2.3 on page 30.

A suitable 2 m long connection cable is included.

NOTICE

Damaging/Destruction of the device
If the safety interlock is not connected, the device can be damaged or 
destroyed due to overheating.

X 

When connecting the laser control, please ensure that the laser is turned 
off in case of an interruption of the connection.

Pin diagram safety interlock 
plug (view connector side)

Pin

Wire color

Function

1

4

3

4

Black

Mutual pin

1

Brown

Connected with pin 4, when ready for 
operation

3

Blue

Connected with pin 4, when in safety 
interlock mode (absorber too hot)

Tab. 9.1:  Pin assignment of the safety interlock plug

9.2 

Micro-USB socket

You can charge the battery of the device on the PC via the micro USB socket. Only use 
the supplied USB cable to charge the battery.
When using the optional LaserDiagnosticsSoftware LDS (not included in delivery), the 
device communicates with the LDS via the micro-USB socket or Bluetooth.
You will find the PRIMES USB-driver for all USB-capable devices on the PRIMES web-
site at: https://www.primes.de/en/support/downloads/software.html.

Summary of Contents for Cube L1

























































Reviews:

No comments