BeamMonitor BM+
35,0(6
25
Revision 02/2019 EN
10.3
Performing a single planes measurement
This chapter aims to provide some basic information as you get to know the BeamMonitor BM+, discussing
the example of a measurement with the LaserDiagnosticsSoftware LDS.
For a detailed description of the software installation, file management and evaluation of the measured data,
please refer to the separate operating manual LaserDiagnosticsSoftware LDS.
10.3.1
Selecting the measuring mode single planes
1. Connect the device according to
chapter 10.2 on page 24 with the
LaserDiagnosticsSoftware LDS.
TheBeamMonitor BM+ is established
as a connected device.
2. Click on the
Scanner
function.
The
Device control
menu opens.
3. Click on the
Measuring mode
drop-
down list.
4. Click on the entry
Single planes
.
Measuring mode Single planes
Drop-down list Measuring mode
The corresponding
Device control
opens.
The
Single planes
tool bench opens
with the following tools:
•
Caustic analysis
•
Plane analysis
