manualshive.com logo in svg

Primes BeamMonitor BM+ Series, Operating Manual

Share
Download
Primes BeamMonitor BM+ Series Operating Manual Download Page 18

BeamMonitor BM+

35,0(6

18

Revision 02/2019 EN

8 

Electrical connections

The BeamMonitor BM+ requires a voltage supply of 24 V ± 5 % (DC) for the operation. A suitable power sup-
ply is included in the scope of delivery.

Data is transmitted between the BeamMonitor BM+ and PC via the Ethernet connection.

Another device, such as a PowerMonitor PM 48/100, can be connected to the BeamMonitor BM+ via the 
RS485 interface (PRIMES bus). The signal from the PowerMonitor PM 48/100 is transmitted through the 
BeamMonitor BM+ to the PC via the Ethernet interface. The additional measuring device is powered by the 
power supply of the BeamMonitor BM+.

Please use only the provided PRIMES power supply and connection lines.

Please ensure that all electrical connections have been established and switch the device on before 
starting the LaserDiagnosticsSoftware LDS.
The BeamMonitor BM+ serves as a dongle for the software on the computer in order to enable 
certain software functions.

8.1 

Connections

Status display

On/Off switch

Ethernet

RS485

Power supply connection

Fig. 8.1: 

BeamMonitor BM+ connections using the example of the BM+ 100

Summary of Contents for BeamMonitor BM+ Series







































Reviews:

No comments

Brands by name

Popular brands

Load more brands