Primera DP-4202 XRP, User Manual

Page: 10 / 56

6 Getting Started
The Power Input Port connects to the included power cable. The
internal power supply is auto-switching in the range of 100-240v.
The Power Switch shuts off all power to the Publisher.
The eSata ports are only visible on Blu-ray units. You will need to
connect an eSATA cable to both of the eSATA ports.
E. LOADING MEDIA (DISCS)
NOTE: Your Publisher can print directly onto virtually any brand of inkjet print-
able-surface CD/DVD media. However, different brands of discs have differ-
ent printable coatings. Because of this, you may need to adjust the printer
driver settings to accommodate your specific
brand of CD/DVD media. Refer to Section 2B.2 and 2E for further printer
driver information.
Due to the wide variety of printable-surface CD/DVD media, you
may find that certain brands of discs provide higher print quality
than others. For maximum print quality, use CD/DVD media autho-
rized by Primera.
Refer to the following steps when loading discs into the Publisher:
• Open the front cover of the Publisher