Primera DP-4202 XRP, User Manual

Page: 42 / 56

38
Creating Discs
6. Select the OK button. Your images should now be centered when
printed on a disc.
Note: If you think you know what values to enter for the horizontal and
vertical fields you may skip the Auto Calibration and enter the values
directly by clicking Manually Set Values.
Change Cartridge
Select the Change Cartridge button to install a new ink
cartridge or to switch back and forth between previously used car-
tridges.
Clean Printhead/Cartridge
If the printer has been idle for a long period of time you may start to
experience some drying of ink in the tiny nozzles that make up the
print head. Clicking this button will cause the Publisher to pick a
disc and place in into the printer tray. The Publisher will then print a
simple pattern that will flush ink through the nozzles. Multiple
cleaning prints may be necessary! If the nozzles are not fully clear
after a few cleaning prints, it may be necessary to remove the
cartridge and manually clean the print head. See Section 3D.
G. LABEL DESIGN REQUIREMENTS FOR OTHER
GRAPHICS PROGRAMS
Other graphics programs can be used to design labels and print
directly to the Publisher.
When printing and burning through the PTPublisher software your
Publisher will support the following additional stardard label image
file formats: BMP, TIF, JPG, GIF, PNG and PRN. These formats can be
exported from most original graphics
formats such as Adobe Photoshop or Illustrator.
When creating images in other graphics programs we
recommend creating a 4.72 x 4.72 square image that has a
300 dpi resolution.