40
Maintenance and Troubleshooting
B. INTERNAL BLUE LED LIGHTS
The Publisher’s Internal LED lights provide useful light and also can
provide status information.
By default, the lights are set to Flash Enabled. This condition will
flash the internal LED lights off and on during any error condition.
•
A Low Ink Warning error will slowly dim the LED lights.
•
A flashing LED light indicates a general system error that needs
attention such as a missing ink cartridge, out of
discs or a mispick. Refer to the PTPublisher software for
instructions on how to correct the problem.
The following internal LED light states can be selected in the
PTPublisher software.
- Flash Enabled (Default) - Errors are indicated in the manner
described above.
- Always On - No errors are indicated.
- Always Off - No errors are indicated.
To access these settings on a PC go to the Tools Menu - Options. To
access these settings on a Mac go the the PTPublisher Menu -
Preferences.
C. TRANSPORTING THE PUBLISHER
To prevent damage to the Publisher’s robotic arm during
shipment, it is important to properly secure it.
To prepare for transport, remove the ink cartridges and disc
holders, close the front cover and then do the following:
1. With the front cover closed, switch off power to the unit.
2. Press and hold the Cartridge Button.
3. While continuing to hold the Cartridge Button, switch on power
to the unit.
Summary of Contents for DP-4202 XRP
Page 1: ...101816 511446 User s Manual 2016 All rights reserved...
Page 55: ......
Page 56: ...P N 511446...
