Primera DP-4202 XRP, User Manual

Page: 17 / 56

Creating Discs
13
Print Quality. All Primera media is automatically defaulted to
the best print quality. Other media may also accept the best
quality setting. However, with some media you may have to
print at a lower print quality to eliminate smudging and
bleeding. Some lower quality media cannot hold all of the ink
that is printed at the highest quality settings.
Click the next arrow.
6. The third and final step of any project is the summary screen.
On this screen you can review the data and print selected for the
project, set the number of copies, adjust burn options and name
the job. Click the Options button to access burn speed and other
options. If you do not adjust the project options, optimal settings
will automatically be selected for you.
Click the "Go" button to start the job.
B. USING PTPUBLISHER
PTPublisher allows you to record and print CDs, DVDs, and BDRs
(Blu-ray) using a variety of project types described below. When the
software is opened these projects will be available from the main
starter menu. At any point you can access these project by clicking
the project in the New Projects area on the left.
B1. Project Types
Note: “Print Only” Project is the only project available for AutoPrinters.
Copy Project
A Copy Project can be used to copy any CD, DVD, DVD-DL or Blu-
ray master. This job type reads the master disc from the Disc
Publisher drive to the hard drive of your computer.
The master is stored in the Global Image format (*.gi) in a
temporary location on your computer. PTPublisher uses
this temporary file to make all subsequent copies that are requested.
The master disc is read only once to create the
initial temporary file.