PRG V476, User Manual

Page: 70 / 444

52 V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
+
Channel - fixture’s channel number.
+ Address - fixture’s DMX universe/address. The DMX universe and address is expressed with dot notation, for
example, the first address of universe 0 (A) would be 0.1.
+
Lamp Curve - specifies lamp dimmer curve setting (if applicable): Fast Bottom, Fast Top, Full at 1%, Hot Patch,
IES Square Law, Slow Bottom, or Slow Top.
+
Focus - options for swapping and/or reversing pan and tilt.
+ Location - for use with 3D graphic features. Refer to "X, Y, Z Locations" on page 345.
+
Orientation - for use with 3D graphic features. Refer to "3D Orientation" on page 346.
+
DMX Offset - sets DMX offset channels between fixtures.
Note: When entering the universe/address, a decimal point must ALWAYS be used even if only one value is provided.
For example if entering both values, the entry would be [ universe#.address# ]. If entering only the universe, the entry
would be [ universe# .]. If entering only the address, the entry would be [. address# ].
Entering Patch Commands
A patch command has the following format:
+ [Patch] [Chan] channel# [At] universe#.address#
If the channel number or DMX address is not included, the luminaire will be patched at the next channel or address.
For example, to patch a luminaire at channel 10 as the first channel in DMX universe 2, enter the following command:
+
[Patch] [Chan] 10 [At] 2.1 [Enter]
A [Patch] [Enter] immediately after this will patch channel 11 with the same luminaire type at the next available DMX
address in universe 2 (as long as channel 11 does not already exist).
Remember to change the luminaire type if necessary before pressing [Enter].
Luminaires are automatically located in the Plan View. The luminaire icons can be moved in the Plan View display
while patch edit is enabled.
Patching a range of luminaires can be accomplished with the following syntax:
+
[Patch] [Chan] start# [Thru] end# [At] universe#.address#
Patching Multi-Channels - Conventionals and Scrollers
Conventionals and scrollers can be patched to multiple DMX channels:
+
[Patch] [Chan] chan# [At] universe#.address# [Thru] address# + address#