PRG V476, User Manual

Page: 286 / 444

268 V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
Record a board cue using the keypad:
When labeling, the name can be entered on the console touchscreen keyboard
or
computer keyboard.
Step 1. Press [Store] [Board Cue] [Enter].
Step 2. Enter sequence of playback actions as required.
Step 3. Press [Store] [Board Cue] [n] [Enter]
or
[Store] [Board Cue] [n] [Label] [Enter]

xxxxxx

Enter/Accept

-
where n is a discrete board cue number. (Board Control [Go] button will light.)
Record a board cue with a linked attribute:
Board cues can be linked to other board cues, macros, or snapshots.
Step 1. Press [Store] [Board Cue] [Enter].
Step 2. Enter sequence of playback actions as required.
Step 3. Press [Store] [Board Cue] [m] [Link] [Board Cue]* [n] [Enter] - where m and n are discrete board cue
numbers.
* Substitute [Macro] or [Snap Shot] in place of [Board Cue] as required.
Record a board cue with a wait time:
Step 1. Press [Store] [Board Cue] [Enter].
Step 2. Enter sequence of playback actions as required.
Step 3. Press [Store] [Board Cue] [n] [Wait] [x] [Enter] - where n is a discrete board cue number. (Board Control [Go]
button will light.)
Deleting Board Cues
Delete a board cue or a range of board cues:
+
[Delete] [Board Cue] [n] [Enter] - deletes the entire board cue.
+
[Delete] [Board Cue] [n] [Thru] [q] [Enter] - deletes a range of board cues.
Recalling Board Cues
Board cues can be recalled and played back using the command-line keypad and
Board Control [Go]. When a board cue is recalled, the [Go] button at the submasters
panel will start flashing. Pressing [Go] will play back the board cue and any linked
events. Pressing [Stop/Back] will pause the board cue autofollow time (not execu-
tion) until [Go] is pressed again wherein it will resume autofollow from the point at
which it was stopped.
Note: [Go] button will only flash while an autofollow is in process.
Play back a board cue:
Step 1. At keypad, press [Board Cue] [n] - where n is the discrete board cue number. (Board Control [Go] button will
light.)
Step 2. At front panel, press Board Control [Go] to initiate playback.
Clear Board Cue indicators from display:
+
Recall a non-existent board cue. For example, [Board Cue] [0] [Enter] will clear display of any board cue
information as long as Board Cue 0 is not a valid board cue.
Stop/
Back
Go
Board
Control