PRG V476, User Manual

Page: 54 / 444

36 V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL
SETTING PREFERENCES
Brightness Level
For Front Panel and Monitors
The brightness level can be set for all monitors, desk lamps, faders, and backlit switches. This is done by pressing the
appropriate button at the Submaster panel while turning the Rate encoder.
To set a new brightness level:
Step 1. At Submaster panel, press and hold appropriate hard button to activate dimming. Options are:
a. "Blank" button above Timing Disable controls backlit switch dimming level.
b. Timing Disable button controls fader backlights.
c. Freeze button controls desk lamps.
d. Rate button controls external monitors.
e. Clear button controls internal monitors (front panel displays).
Step 2. While holding down button, turn Rate encoder until desired brightness level is reached.
Step 3. Release button. New brightness level will be set.
For Keyboard
The brightness level can be set for the pull-out Mac keyboard.
To set a new brightness level for keyboard:
Step 1. At keyboard, press and hold F
N
(function) key.
Step 2. While holding down key, press Up/Down buttons until desired brightness level is reached.
Step 3. Release key. New brightness level will be set.
Rate
Encoder
Internal Monitors
Fader Backlights
External Monitors
Backlit Switches
Desk Lamps
Press to dim:
While turning: