PRG V476, User Manual

Page: 97 / 444

V676
®
/ V476
®
CONTROL CONSOLE USER MANUAL 79
[Next] and [Last]
The [Next] and [Last] buttons will step through all channels.
+
[Next] - increments the channel selection by one.
+
If a single channel were selected (either with the keypad or the 100 button array), pressing [Next] will increment
the channel selection by one. If a range of channels is selected, the first press of [Next] will select the first channel
in that range. Subsequent presses will increment the channel selection by one, but will not select a channel
outside the range.
+
[Last] - decrements channel selection by one.
+
If a single channel were selected (either with the keypad or the 100 button array), pressing [Last] will decrement
the channel selection by one. If a range of channels is selected, the first press of [Last] will select the last channel
in that range. Subsequent presses will decrement the channel selection by one, but will not select a channel
outside the range.
Press and hold [Next] while pressing [Last] to reselect the original channel range.
Note: When working with Ordered Groups, Next/Last will follow original selection order. Refer to "Ordered Groups"
on page 151.
Tilt Pan
Intensity
Full Mark
Out Zero
Last Next
High
Light
Flip
Open
Close
[Next] and [Last] Buttons
Tip