XTR-PX2-C0006-IN004 Ceph option
4-13
3.
Check the
“Result” field, and adjust the tilt of
the field based on the displayed adjustment
value.
4.
Adjust the tilt of the field
First, check that the two screws are fixed
by being butted against the upper side.
Afterwards, loosening the fixing screws,
perform the following adjustments.
(Adjustment screw : M3 x 20 mm)
<When adjustment direction is UP>
1. Just loosen the adjustment screw on
the right side enough to make the
adjustment.
2. Just tighten the adjustment screw on
the left side enough to make the
adjustment.
<When adjustment direction is DOWN>
1. Just loosen the adjustment screw on
the left side enough to make the
adjustment.
2. Just tighten the adjustment screw on
the right side enough to make the
adjustment.
After the adjustment, fasten the fixing
screws.
<Sectional view>
Threaded
Threaded
No threaded
Contact only
Fixing screws
Adjustment screw (right)
Adjustment screw (left)
