C576i Self Powered Elliptical Fitness Crosstrainer
Page 70
Procedure 7.21 - Replacing the PROM
Anti-static kits (part number 20024-101) can be ordered from Precor.
1.
The PROM and the associated printed circuit assembly (PCA) are static sensitive. Anti-
static devices must be used and all anti-static precautions must be followed during this
procedure.
2.
Remove the printed circuit assembly per its associated procedure.
3.
Currently we are using two styles of IC software packages. they are a 28 pin dual in line
package (DIP28) and a forty-four pin square package (PLCC44). Each of these packages
should be removed with a proper IC removal tool (Refer to the illustrations below)
4.
The IC’s may inserted into their socket by hand by carefully aligning the notch on the IC with
the notch on the IC socket and carefully pressing the IC into its socket. Refer to the
illustrations below for the alignment notches. Care must be taken that the IC legs on a
DIP28 are all aligned in the socket to prevent the legs from bending when inserted. The
PLCC44 IC must be carefully aligned squarely in its socket or it will not insert. Do not force
the IC into its, socket. If it does not insert easily, remove the it and re-align it in its socket.
DIP28 removal tool
PLCC44 removal tool
Notch
Notch
DIP28
Notch
Notch
PLCC44
