C576i Self Powered Elliptical Fitness Crosstrainer
Page 35
23. Remove the lower PCA and bracket and carefully support it away from the front section of
the cover.
24. Remove the small cover at the front portion of the cover section by sliding it forward and off
of the front section of the cover. Refer to Diagram 7.3. Remove the two cover mounting
screws.
Diagram 7.3 - Small Cover
25. Remove the front section of the cover from the EFX. Remove the cable clips from the cover
and snap them into their mounting positions in the replacement cover.
26. Set the replacement cover in its mounting position. Fasten the cover with the two screws
removed in step 25. Slide the small cover, removed in step 24, onto the front section of the
cover.
27. Slide the rear section of the cover back into its mounting position and fasten it with the four
screws removed in step 20.
28. Set the lower PCA and mounting bracket in its mounting position and fasten it with the two
screws removed in step 22.
29. Dress the cables, remove in step 21, into the two lower cable clips on the front section of the
cover.
30. Replace the top section of the cover as described above.
31. Replace the left and right cover sides as described above.
Small Cover
Cover Mounting Screws
