Loop Leader PD6622/4 Loop-Powered Rate/Totalizer Instruction Manual
35
Programmable Function Keys User Menu (
USER
)
The
User
menu allows the user to assign the front panel function keys F1, F2, and F3, and the digital in-
put (located on the signal input connector) to access most of the menus or to activate certain functions
immediately (e.g. reset max & min, hold relay states, etc.). This allows the meter to be greatly customized
for use in specialized applications.
Function Keys & Digital Input Available Settings
Refer to the following table for descriptions of each available function key or digital input setting.
Display
Description
DISP FN
Set the function key or digital input to
display a value
DISPLAY
Cycle max, min, rate, total, and grand
total
D RATE
Display the rate
D TOTAL
Display the total
DISP GT
Display the grand total
PCT.RATE
Display the rate’s percentage of max
(20 mA)
D UNITS
Display rate, total, and grand total
units
D TAG
Display the tags
DISPMIN
Display the minimum rate value
DISPMAX
Display the maximum rate value
MIN MAX
Display the minimum and maximum
rate value
D mA IN
Display the current mA input value
D mAOUT
Display the current mA output value
MENU FN
Set the function key or digital input to
access a menu
RLYINFO
Go to relay information menu (
INFO
)
MANCTRL
Go to output control menu
(
CONTROL
)
TIMER.FN
Set the function key or digital input to
start or stop a timer
STRT.ALL
Start all timers
STOP.ALL
Stop all timers
S.STP.ALL
Start or stop all timers
OC1
Start/stop open collector 1 timer
OC2
Start/stop open collector 2 timer
RLY1
Start/stop relay 1 timer
Display
Description
RLY2
Start/stop relay 2 timer
START
Start the selected timer output
STOP
Stop the selected timer output
STR-STP
Start or stop the selected timer output
BATCH.FN
Set the function key or digital input to
batch control
START
Start a batch
STOP
Stop a batch
STR-STP
Start or stop a batch
PRESET
Preset batch amount
ALARM.FN
Set the function key or digital input to
acknowledge an alarm
ACK
Acknowledge all active alarms
HOLD FN
Set the function key or digital input to
hold an output
HOLD.OUT
Hold all outputs
HLD.UNHLD
Hold or un-hold all outputs
OC1+2
Hold/un-hold open collector outputs
RLY1+2
Hold/un-hold relay outputs
mAOUT
Hold/un-hold 4-20 mA output
HOLD
Hold selected output
HLD.UNHLD
Hold or un-hold selected output
DISABLE
Disable function key or digital input
RST FN
Set the function key or digital input to
reset a value
RESET
Reset min, max, or max/min PV value
R MIN.MAX
Reset max and min PV value
RST T
Reset the total
RST GT
Reset the grand total
RST T.GT
Reset the total and grand total
USER
USER
F1
USER
F2
USER
F3
USER
DI
USER
HINT
F1
DISP FN
F1
MENU FN
F1
TIMER.FN
F1
ALARM.FN
F1
HOLD FN
F1
RST FN
F1
DISABLE
HINT
OFF
HINT
ON
