P
RO
V
U
™ PD6310-WM NTEP Certified Pulse Input Batch Controller
Instruction Manual
15
Installation Overview
We recommend the following sequence for getting the
controller into service:
1.
DO NOT
apply AC or DC power to the controller.
2. Connect the controller to the PC with the USB
cable provided.
DO NOT
use a different USB
cable.
3. If MeterView Pro (MVPro) is already installed in
your computer, then the program will launch
automatically in most systems. If the program
does not start automatically, double-click on the
MVPro icon.
4. If MVPro is not installed, follow the instructions
provided below.
5. Use MVPro to configure the controller for your
application.
6. Disconnect the USB cable from the controller.
7. Apply power and signal and check operation of
the controller.
8. Install the controller and put into service.
9. Make any programming adjustments using the
front panel buttons.
MeterView Pro Software
The easiest and quickest way to program your P
RO
V
U
controller is to use the FREE MeterView Pro
programming software. This software is loaded into
the controller and connects and installs directly to
your PC with the USB cable provided.
DO NOT
use a
different USB cable. We recommend that the first
thing you do after taking the controller out of the box
is connect the P
RO
V
U
to your PC with the provided
USB cable.
DO NOT
apply AC or DC power to the
controller while your PC is connected to the controller
as it will disrupt the USB connection. It is not
necessary to apply an input signal.
MeterView Pro programming software is intuitive, and
most customers can get their controller programmed
as they like without even looking in the manual.
Watch Meterview Pro Software Video at
MeterView Pro Installation
1.
Connect one end of the provided USB cable
to the controller and the other end to the
computer. The computer will automatically
install the driver software it needs to talk to
the controller. Follow the on-screen
instructions and allow sufficient time for the
process to complete. This can take a few
minutes. If the process is interrupted, then it
could leave the system in an unstable
condition
.
•
Only one controller may be connected at a time.
Attaching multiple controllers will cause a conflict
with the controller software.
•
DO NOT
apply AC or DC power to the controller
when using the Micro USB
connection.
2. Once the driver is installed, an AutoPlay
dialog should appear for the drive
“MAINSTAL.” Click “Open folder to view
files.”
If the computer does not display an AutoPlay
dialog for the drive “MAINSTAL,” you should
open My Computer and double-click on the
drive labeled “MAINSTAL.”
3. Double-
click on the file named “MAStart.”
The program will open a few windows and
install two programs on your computer.
Simply follow the on-screen instructions until
you see one of the dialogs below. If you
receive a “User Account Control” warning,
click “Yes.”
4. If there is an update available, click the
“Update” button to install the new version.
Otherwis
e, click “Configure” to begin
programming your controller.
Note:
If you decide to update your MeterView Pro
software, once the installation has completed, you
will be asked if you want to update the setup files
located on the controller itself. This way, you will
always have the most current version on the
controller for future installs.
•
DO NOT
unplug the controller while the new
installation files are being written to it. The
controller will display
uwrite
during the process
and you will receive an on-screen notification
once the process is complete.
