P
RO
V
U
™ PD6310-WM NTEP Certified Pulse Input Batch Controller
Instruction Manual
6
Introduction
The P
RO
V
U
PD6310-WM Series are NTEP
®
Certified
pulse input batch controllers certified as weighing and
measuring devices. These easy-to-use batch
controllers are ideal for weights and measures
applications, and provide simple independent batch
control operation where local control is preferred to
expensive and expansive operation systems. Their
SunBright LED digits make it easily readable in
smoke, dust, fog, and even direct sunlight.
The controller has a mechanically secured
programming lockout feature. A cable with
compression seal may be secured to prevent the
removal of the rear case, preventing access to the
programming lockout jumper.
The controller comes programmed for easy front
panel start, pause, stop, and batch size (preset)
changes. Display line 2 can be programmed to
display rate, grand total, batch count, or preset by
cycling the Stop (F3) button. A digital input is
standard.
Single and multi-stage batching is possible with up to
four (4) on-board relays and four (4) external relays
with the external relay module. Each pre-close relay
may have a unique pre-close amount when used for
multi-stage batching.
Manual start batching is default, but automatic
batching with a restart after a programmed time delay
from the completion of the last batch, is also possible.
Overrun correction adjusts the closing of the batch
control relays to adjust for inaccuracies from batch to
batch. This increases accuracy over time as systems
wear out. The overrun correction feature is capable
of compensating for inaccuracies of up to 1% of the
programmed preset value.
At least two SPDT relays are included for use in batch
control or rate alarms.
The batch controller also shares all common P
RO
V
U
Series features, including an isolated 24 VDC
transmitter power supply and Modbus RTU Serial
communications.
Ordering Information
SunBright Display Models
85-265 VAC
Model
12-24 VDC Model
Options
Installed
PD6310-6H2-WM
PD6310-7H2-WM
2 relays
PD6310-6H4-WM
PD6310-7H4-WM
4 relays
PD6310-6H5-WM
PD6310-7H5-WM
2 relays
4-20 mA out
PD6310-6H7-WM
PD6310-7H7-WM
4 relays
4-20 mA out
Accessories
Model
Description
DIN rail mounting kit for two devices
4 SPST (Form A) relays module
4 digital inputs & 4 digital outputs module
RS-232 serial adapter
RS-485 serial adapter
RS-232 to RS-485 isolated converter
USB Adapter
USB to RS-232 non-isolated converter
USB to RS-485 isolated converter
Light / horn accessory
Light / horn / enclosure modification
Plastic control stations series
Signal isolators, splitters, & conditioners
Multi-function calibrator
Snubber: 0.01 μF/470 Ω, 250 VAC
Enclosures
Series
Meters
Material
1-10
Plastic NEMA 4X
1-6
Plastic NEMA 4X
1-6
Stainless Steel NEMA 4X
1-6
Painted Steel NEMA 4
1-2
Plastic NEMA 4X
1-3
Plastic NEMA 4X
Need help selecting the right enclosure?
Replacement Option Cards
Model
Options Installed
2 relays
4-20 mA output
4 relays
2 relays & 4-20 mA output
4 relays & 4-20 mA output
