■
3 Below-balance weighing
4
3
Below-balance weighing
Objects which, because of their size or shape, cannot be put on the scale, can be weighed by means of be-
low-balance weighing.
Proceed as follows:
• Turn off the balance.
• Remove the weighing pan and the pan holder than turn the balance up side down.
• Remove the screw (14) on the underside of the balance.
• Hang the hook for weighing below (available as an accessory, see chapter 4 "Acessories") into the aper-
ture (16) of the now visible metal casting (15).
• Place the balance over an opening.
• Replace the pan holder and the weighing pan.
• Level the balance (see chapter 3.6 "Levelling")
• Switch on the balance.
• Hang the object to be weighed on the hook and carry out the weighing.
WARNING
Take care that the hooks used for the below-balance weighing are stable enough to hold the goods
which you wish to weigh.
NOTE
Take care that no dirt or moisture can get into the balance with the weighing pan removed.
After completing the below-balance weighing, the opening in the floor of the balance must be closed again
(dust protection).
kg
16
15
14
KA321_010
