■
10 Working with the application menu
26
10.6 Application “PERCENT”
See Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu control operates” for the
activation of the application menu.
With the aid of the “PERCENT” program you can display and print out the weight of different measurements
as a percentage of a previously defined reference weight.
Operation:
Start the application (see Chapter 10.3 “Changing application / weighing mode”).
• Place the reference weight on the weighing pan.
• Press the «
REF
»-button until “REFERENCE 100%” appears on the display.
• Release the «
REF
»-button.
10.7 Calculator
See Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu control operates” for the
activation of the application menu.
With the aid of the „CALCULATOR“ application the current measurement is converted in accordance with
the factor assigned and the result shown or printed out after pressing the Print key. Thus, for example, you
can convert and display the weights of sample materials of known size directly into “gram per cubic metre”.
Operation:
Start the application (see Chapter 10.3 “Changing application / weighing mode”).
• Press the «
REF
» button until „CALCULATION name“ appears on the display.
• Release the «
REF
» button.
10.8 Application «Net-Total»
There is no Setup menu for this application.
With the aid of the „NET-TOTAL“ application you can add individual weighings, where the balance is tared
to zero again before each individual weighing.
Functions of the application:
• SETUP APPLICATION
PERCENT
DECIMALS
AUTO
0
1
2
etc.
Enter number of decimal places.
The number of places that can be selected
after the decimal point depends on the
balance model.
• SETUP APPLICATION
CALCULATOR
NAME
nnnnn
Calculation name, max. 5 characters
FACTOR 1.00
Conversions
factor
MODE
F * WEIGHT
F / WEIGHT
Multiplication of the factor by the weight or
division of the factor by the weight
DECIMALS
0
Definition of number of decimal places are to
be shown in the result.
DISPLAY-TEXT
nnn
Unit shown in the display, max. 3 characters.
PRINTER-TEXT
nnnnnnnn
Unit being printed, max. 8 characters.
«STO n»:
- Take stable value and add to the sum of the components.
- Tare balance.
- Short acustic confirmation
«WAIT i»:
Value not stabilized yet
«RES»:
- Reset
