Precisa LX 321 Operating Instructions Manual Download Page 38

Page: 38 / 44

15 Practical examples

■

15.1.4 Activation of password protection

The possibilities for setting the password protection are described in Chapter 9.9 “Password protection”.

In order to activate password protection, proceed as follows:

15.2 Selection of an application program

See Chapter 8.5.2 “Activating the application menu” for the activation of the application menu.

15.2.1 Setting for Counting by weighing

For Setup, see Chapter 10.5 “Application “COUNT””
To count uniformly heavy objects such as coins, screws or similar things, proceed as follows:

By briefly depressing the «

MODE

»-button you can change to “COUNT”.

Place the set number of objects on the weighing pan. The reference weight for the count will be defined by
briefly depressing the «

REF

»-button.

PASSWORd ––––

• Press «

MODE

» and hold down button until “PASSWORD ––––” appears.

• Release the «

MODE

»-button.

PASSWORd

000

• Press «

MODE

» briefly. The first digit of the password will flash.

• Enter the first digit by briefly pressing «

MODE

» repeatedly.

PASSWORd 7

• Press «

MODE

» until the second digit flashes. Enter the second digit by

briefly pressing «

MODE

» repeatedly.

PASSWORd 7914

• In the same way enter the third and fourth digit of the password.
• Hold down «

MODE

» until input is complete (no digit flashing).

DATA-PROTECTION OFF

• Press «

MODE

» briefly. “DATA-PROTECTION ...” will appear.

• Press «

MODE

» repeatedly, until the desired data-protection is displayed

(the setting will flash).

new PASSWORd 7914

• Press «

MODE

» and hold down button until “NEW PASSWORD 7914”

appears.

• Release the «

MODE

»-button.

new PASSWORd 1234

• Your own new password can now be entered in a similar manner to the

foregoing.

PASSWORd ––––

• Press «

PRINT

» to return to “PASSWORD ––––”.

• Press «

PRINT

» to exit menu.

SET APP. . . .

• Press «

MODE

» and hold down button until the currently set application

appears.

• Release the «

MODE

»-button.

SET APP. count

• Press «

MODE

» repeatedly, until “SET APP. COUNT” is displayed (the ap-

plication will flash).

• Press «

PRINT

» to confirm the input.

SETup APPlication

• Press «

MODE

» until “SETUP APPLICATION” appears.

• Release the «

MODE

»-button.

Reference 10 pcs

• Press «

MODE

» briefly, the currently set reference quantity appears.

• Release the «

MODE

»-button.

Reference

10 pcs

• Press «

MODE

» briefly. The first digit of the reference quantity will start

to flash.

• Enter the first digit by briefly pressing «

MODE

» repeatedly.

Reference 0

0 pcs

• Press «

MODE

» until the second digit flashes. Enter the second digit by

briefly pressing «

MODE

» repeatedly.

Reference 025 pcs

• In the same way enter the third digit of the reference quantity.
• Hold down «

MODE

» until input is complete (no digit flashing).

• Press «

PRINT

» twice to exit menu.

Summary of Contents for LX 321













































Search results

Summary of Contents for LX 321

Reviews:

Related manuals for LX 321

Brands by name

Popular brands

Precisa LX 321, Operating Instructions Manual

Search results

Summary of Contents for LX 321

Reviews:

Related manuals for LX 321

Brands by name

Popular brands