Precisa LX 321 Operating Instructions Manual Download Page 19

Page: 19 / 44

■

9 Working with the configuration menu

Working with the configuration menu

This chapter describes the configuration menu and its functions.
To activate the menu, see Chapter 8.5 “Activating the two main menus” and Chapter 8.6 “How the menu
control operates”.

9.1

Structure of the configuration menu

The basic adjustment of the balance is defined in the configuration menu:

Printing conventions used in this document:

• The settings in the sub-paths pre-programmed in the works are printed in

bold

in these operating instruc-

tions.

• For greater clarity, only that part of the menu tree which corresponds to the function is shown with each

description of the function.

• You will find the entire menu tree for the configuration menu in Chapter “«MODE»- and «0/T»- button

pressed on switching on:”.

• Explanations of the menu functions are printed in

italics

9.2

Language-function

To activate the menu see Chapter 8.5 “Activating the two main menus” und Chapter 8.6 “How the menu
control operates”.

In order to alter the language, proceed as follows:

• Switch off balance.

• Switch on balance and depress «

MODE

» until the currently activated language is shown.

• Release «

MODE

».

• Press «

MODE

» repeatedly until the language you require is shown.

• Press «

PRINT

» in order to confirm the selection.

• Press «

PRINT

», in order to quit the menu.

Menu

Definable functions

LANGUAGE

Display language (E, G, F)

UNIT-1

Unit in which the weighing results are displayed

SET DATA PRINT

Print formats; Type of values to be printed (individual values, continuous printout,
time or load change dependent values, date, time, user, etc.)

SET CALIBRATION

Calibration method

SET
WEIGHING MODE

Stability mode (Quality of the balance location), Auto-Standby mode, zero correc-
tion, tare method (rapid or standard tare)

SET INTERFACE

Baud rate, parity, handshake functions of the peripheral interface

SET
DATE AND TIME

Date and time (standard format or American format p.m. and a.m.)

PASSWORD

Activating/deactivating and changing the anti-theft code.

THEFTCODE

Password protection for defining the menus.

SET KEYBOARD

Activation of the keypad sound

BUS

Enables disables Precisa BUS accessories

• LANGUAGE

LANGUAGE

ENGLISH

SPRACHE

DEUTSCH

LANGUE

FRANCAISE

Selecting a language

Summary of Contents for LX 321













































Search results

Summary of Contents for LX 321

Reviews:

Related manuals for LX 321

Brands by name

Popular brands

Precisa LX 321, Operating Instructions Manual

Search results

Summary of Contents for LX 321

Reviews:

Related manuals for LX 321

Brands by name

Popular brands