Precisa LX 321, Operating Instructions Manual

Page: 34 / 44

13 Special operating keys ■
33
En
gl
is
h
13 Special operating keys
13.1 The Tare key «0/T»
• Effects taring
– Ensure that the balance is in the weighing mode
– Briefly press
«0/T»
– The balance performs a tare operation.
• Effects a calibration
– Ensure that the balance is in the weighing mode
– Keep
«0/T» pressed until “CALIBRATION” is displayed
– Release «0/T»
– The balance carries out a calibration in accordance with the settings in the configuration menu (cf.
Chapter 9.5 “Calibration functions”) and reports these by means of a printout.
13.2 The Print key «PRINT»
• Print out an individual value or a report
– Ensure that the balance is in the weighing mode
– Briefly press «
PRINT »
– The individual value or report will be printed out.
• Reset product counter to 1
– Ensure that the balance is in the weighing mode
– Keep «
PRINT » pressed until “RESET PROD.-COUNTER” is displayed
– Release « PRINT »
– The product counter will be reset to 1.
• Print out a balance status
– Ensure that the balance is in the weighing mode
– Keep «
PRINT » pressed until “PRINT STATUS” is displayed
– Release « PRINT »
– The balance status will be printed out.
• Print out the application-setup
– Ensure that the balance is in the weighing mode
– Keep «
PRINT » pressed until “PRINT APPLICATIONS” is displayed
– Release « PRINT »
– The application-setup will be printed out.
• Print out the calibrations information
– Ensure that the balance is in the weighing mode
– Keep «
PRINT » pressed until “PRINT CALIBRATIONS” is displayed
– Release « PRINT »
– Information on the last 50 calibrations is printed. The time and date, as well as the temperature in the
balance at the time of calibration in degrees Celsius. If more than 50 calibrations have been performed,
the oldest are deleted.
• Print out the firmware update history
– Ensure that the balance is in the weighing mode
– Keep «
PRINT » pressed until “PRINT FIRMWARE HIST” is displayed
– Release « PRINT »
– Information on the firmware which has been loaded together with the time and date is printed.
NOTE
A calibration can be cancelled with « ON/OFF ».