15 Data Transfer
■
67
En
gl
is
h
•
Standard, duplex connection with additional hardware handshake in the peripheral device
15.2 Remote control-commands
15.2.1 Examples for the remote control
Dryer
DB 9 female D25 / D9 Peripheral device
RS 232 out
2
3
/ 2
RS 232 in
RS 232 in
3
2
/ 3
RS 232 out
GND
5
7
/ 5
GND
CTS
4
20
/ 4
DTR
DTR
8
5
/ 8
CTS
Command
Function
ACKn
Acknowledge n=0 off; n = 1 on
CAL
Start adjustment
N
Reset dryer
OFF
Switch off dryer
ON
Switch on dryer
PDT
Print out date and time
PRT
Start printing (Press «
» key)
PST
Start print status of current user
Pn (ttt.t)
Set print mode for weight only
n=0 Individually print each value (unstable)
n=1 Individually print each value (stable)
n=2 Print after change of load
n=3 Print after each integration period
n=4 Print on time basis in s (ttt.t)
PWT ttt.t
Set print mode for weight and temperature
Print on time basis in s ttt.t
R (nnn)
Heat to specific temperature
n=0 to switch off heating
n=40 to 230
SDTttmmjj
hhmmss
Set date and time (German) (Tag, Monat, Jahr, Stunde, Minute, Sekunde)
SDTmmddyy
hhmmss
Set Date and Time (English) (Month, Day, Year, Hour, Minutes, Seconds)
T (ttt)
Tare or set tare to a specific value
ZERO
Zero balance (provided weight is stable and within the zero position range)
NOTE
Each remote control-command must terminate with «CR» «LF». The commands are acknowledged if re-
quired.
Input
Description of the function executed
R105
Heat to 105°C
R0
Switch off heating
T2.7
-2.7 g (Tare set to 2.7 g)
T1
-1.0 g (Tare set to 1.0 g)
T
Dryer is tared
