Prebena 9A-MGS-55, Operating Manual

Page: 82 / 192

Operating electrical tools
34
Press and hold switch (4) to fasten additional screws.
Place depth stop (16) on the next position.
Push the auto feed screwdriver down steadily and quickly.
The next screw is fastened.
You can repeat this process as long as you press the ON/OFF
switch with screws in the magazine and a charged battery pack.
CAUTION
Placing the depth stop on a work piece without
screws in the magazine can damage the
fastening surface.
Use the feeding device only when the
magazine has been filled.
To guarantee full power during quick fastening operations do
not switch the drive unit on and off but keep it switched on and
running continuously.
Interrupting an operation
You can suspend the auto feed screwdriver during short
interruptions. The belt clip (12) on the left of the tool has been
provided for this purpose.
Reloading the magazine
Refill the magazine as described on page 22.
Charging the rechargeable battery pack
Charge the battery pack as described on page 19.